I have a question about summarization in ISIS. when I enable summary-address on the L1/L2 router, it will generate a static route to null interface and the summary route will only send to other area's L1/L2 router. Is it normal? I use IOS 12.2.
Thank you for your kind reply. Would please tell me from which version IOS there is a static route to null interface in routeing table, when I use summarization in OSPF or ISIS environment. As I know before, only EIGRP can generate this kind of route automatically.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...