Im just getting started with a cisco 1720 and am having troubble getting my config straightend out.
Im connecting to a T1 and a small ethernet lan,
currently my router is trying to get its config from
a tftp server. I dont have a tftp set up and I am not looking to do so. The forst thing I need to know is how to disable this feature and also if there is a easy to follow giude that explains how to set up a 1720 that has a T1 connection to the internet. Any help will be appreciated.
This document gives several answers on frequently asked questions for PFRv3 channel state behavior.
Q1: What are all the channel operational states from a BR (border role) perspective and what are the rules/conditions to be in each st...
The need was to reach an host inside a LAN through a VPN connection managed by the LAN gateway (Cisco 1921).
The LAN gateway performs NAT and there was a dedicate nat rule for the host i wanted to reach through VPN.
I couldn't connect to the hos...
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...