We have quite a lot LAT services between three sites. At the moment we have a 2x 64K ISDN links between the 3 sites and bridge LAT traffic across. Now We would like our IP link to carry these LAT traffic.
I think that protocol translation is not scalable and could not be used in our case.
Can DLSw+ be used instead? If yes, does LAT multicast cause any issue in term of network performance?
Translational bridging allows you to bridge between dissimilar LANs, commonly Ethernet and Token Ring, or Ethernet and FDDI. In the case of Ethernet and Token Ring bridging, translational bridging only allows connectivity for non-routable protocols such as Local-Area Transport (LAT), Maintenance Operation Protocol (MOP), and Network Basic Input/Output System (NetBIOS).
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...