Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

late-drop counter on "the sh int xy"

hi ,

i have problems with a fr-interface on which i have a pvc which has drops:

there are 4 pvc´s on this physical int - on one of these 4 a have problems with slow response and drops.

mplsrbgope01#pvc 241

PVC Statistics for interface Serial1/2 (Frame Relay DTE)

DLCI = 241, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial1/2.241

input pkts 67722 output pkts 86323 in bytes 13799766

out bytes 30487947 dropped pkts 77 in pkts dropped 0

out pkts dropped 77 out bytes dropped 5771

late-dropped out pkts 77 late-dropped out bytes 5771

in FECN pkts 221 in BECN pkts 2676 out FECN pkts 0

out BECN pkts 0 in DE pkts 0 out DE pkts 0

out bcast pkts 153 out bcast bytes 11376

5 minute input rate 239000 bits/sec, 146 packets/sec

5 minute output rate 468000 bits/sec, 180 packets/sec

pvc create time 1w4d, last time pvc status changed 00:28:04

What does the "late-dropped" counter mean ??

thanks

1 REPLY
Silver

Re: late-drop counter on "the sh int xy"

late-dropped out packets means total output packets dropped under some QoS functions, like VC queuing, FRTS, QoS .These are normal operation drops, and this is because you might have configured traffic shaping or implementing QoS.

285
Views
0
Helpful
1
Replies
CreatePlease login to create content