Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

learn and lock pb

hi,

on a catalyst 3100,

in order to block each mac @ that not belong to known machines, I enabled the "learn and lock" option, I was connected on the switch by telnet. I lost the connection. now, it's like each port is lock, and no machine can connect to the switch. after a reboot, I tried a machine with a mac adress not "learned" by the switch but nothing to do. all the ports are locked. I can do nothing.

it's like the switch is "learning" all the time. What can i do ?

danke schöne

1 REPLY
New Member

Re: learn and lock pb

The only problems I have seen with the learn and lock feature is related to DHCP. If you are obtaining your IP address through DHCP, try assigning it statically to see if that makes a difference.

220
Views
0
Helpful
1
Replies
CreatePlease login to create content