If i have a leasedline RouterA(ISP)how can i add another Leasedline RouterB by connecting
routerB to the FastEthernet port of router A?
Currently router A is conected to the backbone router
via a POS interface and i dont have a POS interface to directly connect to the backbone router for router B. Router A(area 1400) connects to backbone router(area 0) via iBGP. Currently i'm only running OSPF on router B and i have to advertise the network to all the other router when i'm configuring a leasedline customer LAN ip. Router a is running ospf and BGP.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...