LED Status

[Markus60]

How can I request the status of the LED (green or yellow) for the ports at the front of catalyst 2950-48 from remote.

I dont found any information in the show commands.

I have 2 Switches in parallel for redundancy, so I like to know from remote (telnet) which Switch is working and which is standby.

Thanks.

Markus

[Prashanth Krishnappa]

You cannot find the status of LED from a sh command. The common LED states are explained here.

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat2950/12114az/2950hig/hgovrev.htm#55402

However if you have web interface through Visual switch manager, you can have a graphical interface to the switch using a internet browser

http://www.cisco.com/warp/public/473/59.html

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat2950/12119ea1/2950scg/swcms.htm#999123