i have modular enterprise catalysts 2924 switches connected to a central catalyst 5505 switch. the modular catalyts 2924 switches are also connected in a ring. my topology is a star - ring. all my connections are dedicated 100mbps, full duplex links.
i occasionally encounter link speed mismatch on some links between the modular catalyst 2924 switches on the ring. i am monitoring the network using cisco works 2000.
Type Severity Description
Link Duplex Mismatch High Pair( 10.1.10.2, FastEthernet2/2 ) full-duplex|Pair( 10.1.12.2, FastEthernet2/3 ) half-duplex|
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...