03-29-2004 02:55 AM - edited 03-02-2019 02:37 PM
Hi All,
i have LMS 2.2 Bundel, after installing LMS 2.2, Wether i hv to install CD 1 or itis already there. pls give me suggestion.
Thanks & Regards,
Ciscobuddy
03-29-2004 04:02 AM
In the LMS 2.2 bundle, the components formerly included on CD 1 have been replaced with "Common Services 2.2".
03-29-2004 05:46 AM
LMS 2.2 comes with Common Services 2.2 which is a replacement of formerly CD1.
03-31-2004 12:17 AM
hi ,
Thanks for ur reply.canu pls give me the URL for to configure the LMS Bundel 2.2
Thanks & Regards,
ciscobuddy
03-31-2004 05:11 AM
04-02-2004 10:02 PM
Hi,
thanks for ur help. i hv install LMS 2.2 bundel in Sun Solaris server OS ver is 2.8. But phasing porblem in campus manager , i can detect my 6509,GSR and 7513 in campus manager but i can't detect 3512. can anybody give me the suggestion. any patches or any IDU i hv to install?
thanks in advance
rgds,
ciscobuddy
04-02-2004 11:25 PM
Hi,
one more input i want to give u all, that following IOs version i am using for 3512 right now. and it is connected to my network threw 6509 which is actiong as a PE in my network.
Thanks in advance
rgds,
ciscobuddy
sh ver
Cisco Internetwork Operating System Software
IOS (tm) C3500XL Software (C3500XL-C3H2S-M), Version 12.0(5.2)XU, MAINTENANCE INTERIM SOFTWARE
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Mon 17-Jul-00 18:29 by ayounes
Image text-base: 0x00003000, data-base: 0x00301F3C
ROM: Bootstrap program is C3500XL boot loader
DHAR_3512 uptime is 17 weeks, 5 days, 1 hour, 22 minutes
System returned to ROM by power-on
System image file is "flash:c3500XL-c3h2s-mz-120.5.2-XU.bin"
cisco WS-C3512-XL (PowerPC403) processor (revision 0x01) with 8192K/1024K bytes of memory.
Processor board ID FAB0515V0X5, with hardware revision 0x00
Last reset from power-on
Processor is running Enterprise Edition Software
Cluster command switch capable
Cluster member switch capable
12 FastEthernet/IEEE 802.3 interface(s)
2 Gigabit Ethernet/IEEE 802.3 interface(s)
32K bytes of flash-simulated non-volatile configuration memory.
Configuration register is 0xF
04-03-2004 11:10 AM
Is the 3500XL a cluster member?
Check the note on the Device Support Page (http://www.cisco.com/en/US/products/sw/cscowork/ps563/products_device_support_table09186a008017b4a2.html):
"3500XL series is supported in IP Mode only. Clustered devices not assigned an IP address are not supported."
Regarding the IOS version, There is an issue with 12.0(5)XP mentioned, But nothing specifically referencing 12.0(5.x)XU:
"User Tracking will not discover end-hosts connected to Catalyst 2900XL or Catalyst 3500XL devices running IOS 12.0(5)XP."
04-05-2004 02:15 AM
hi,
Thanks for ur reply, gone threw ur URL. little bit confused regarding 3512 issues which i am phasing. they doesn't mention that for 3512 u hv to install particular IDU coz i hv install IDU 7 already. so can u give me suggestion. that which IDU i hv to install.
Thanks In advance
rgds,
ciscobuddy
04-06-2004 10:01 PM
Hi All,
please help me...my problem is not solved
Thanks & Regards,
Ciscobuddy
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: