03-27-2003 08:06 AM - edited 03-02-2019 06:12 AM
We have 6509 running hybird mode, 6.1(2) CatOS and 12.1(4)E1 IOS.
How can I setup MSFC to load both IOS and configuration from sup-slot0: in case either the config on NVRAM or IOS on bootflash: corrupted?
Would "boot system flash sup-slot0:<file_name>" override the current setting or it will append to the end as on CatOS?
Would "boot config sup-slot0:<file_name>" override the current setting or it will append to the end as on CatOS?
Solved! Go to Solution.
04-03-2003 08:32 AM
Detailed explanation of same is in this page:
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sw_6_3/confg_gd/redund.htm
Regrding second question, as far as my knowledge goes, both commands will append the settings.
04-03-2003 08:32 AM
Detailed explanation of same is in this page:
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sw_6_3/confg_gd/redund.htm
Regrding second question, as far as my knowledge goes, both commands will append the settings.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: