lock and key question

[rjackson]

Hi all,

Can lock and key be implemented in a way that will force authentication for traffic going through a router without affecting the telnet login to manage the router?

In the examples I've found the step that puts the autocommand access enable on the vty lines forces management login to go through the same process.

[cymurai]

Hope this helps!

http://www.cisco.com/en/US/tech/tk583/tk822/technologies_tech_note09186a0080094524.shtml

[benjamingarcia]

you will need to apply the autocommand access-enable on the username and not on the line vty 0 4. I guess

[rjackson]

Interesting, i never noticed the option there. I'll give it a try.

Thanks