Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Log Error Messages 6500

I have found the messages below in the log this morning. Could anybody help with what they actually mean, or point me in the right direction to find out.

Nov 17 21:01:51: SP: LTL_DEBUG_ASSERT: Failure on *(lindex + j) != LTL_BIT_BUCKE

T

Nov 17 21:01:51: SP: LTL_DEBUG_ASSERT: Failure on *(lindex + j) != LTL_BIT_BUCKE

T

Nov 17 21:01:51: SP: LTL_DEBUG_ASSERT: Failure on *(lindex + j) != LTL_BIT_BUCKE

T

Nov 17 21:01:51: SP: LTL_DEBUG_ASSERT: Failure on *(lindex + j) != LTL_BIT_BUCKE

T

Nov 18 00:48:54: SP: LTL_DEBUG_ASSERT: Failure on *(lindex + j) != LTL_BIT_BUCKE

T

Nov 18 00:48:54: SP: LTL_DEBUG_ASSERT: Failure on *(lindex + j) != LTL_BIT_BUCKE

T

Nov 18 00:48:54: SP: LTL_DEBUG_ASSERT: Failure on *(lindex + j) != LTL_BIT_BUCKE

T

Nov 18 00:48:54: SP: LTL_DEBUG_ASSERT: Failure on *(lindex + j) != LTL_BIT_BUCKE

T

Nov 18 04:36:09: SP: LTL_DEBUG_ASSERT: Failure on *(lindex + j) != LTL_BIT_BUCKE

T

Nov 18 04:36:09: SP: LTL_DEBUG_ASSERT: Failure on *(lindex + j) != LTL_BIT_BUCKE

T

Nov 18 04:36:09: SP: LTL_DEBUG_ASSERT: Failure on *(lindex + j) != LTL_BIT_BUCKE

T

Nov 18 04:36:09: SP: LTL_DEBUG_ASSERT: Failure on *(lindex + j) != LTL_BIT_BUCKE

T

Nov 18 08:23:23: SP: LTL_DEBUG_ASSERT: Failure on *(lindex + j) != LTL_BIT_BUCKE

T

Nov 18 08:23:23: SP: LTL_DEBUG_ASSERT: Failure on *(lindex + j) != LTL_BIT_BUCKE

T

Nov 18 08:23:23: SP: LTL_DEBUG_ASSERT: Failure on *(lindex + j) != LTL_BIT_BUCKE

T

Nov 18 08:23:23: SP: LTL_DEBUG_ASSERT: Failure on *(lindex + j) != LTL_BIT_BUCKE

T

6 REPLIES
Purple

Re: Log Error Messages 6500

Use the output interpreter and see if that comes back with anything .

New Member

Re: Log Error Messages 6500

Thanks for the suggestion however, the output interpreter came up blank.

Cisco Employee

Re: Log Error Messages 6500

do u have any SLB module inserted ?

New Member

Re: Log Error Messages 6500

Please see show mod below. The only thing similar is the CSM card in slot 8

show module

Mod Ports Card Type Model Serial No.

--- ----- -------------------------------------- ------------------ -----------

1 2 Catalyst 6000 supervisor 2 (Active) WS-X6K-SUP2-2GE SAL0652AXRJ

3 16 SFM-capable 16 port 1000mb GBIC WS-X6516-GBIC SAL0652ALHJ

4 16 SFM-capable 16 port 1000mb GBIC WS-X6516-GBIC SAL0652AJZT

6 16 SFM-capable 16 port 1000mb GBIC WS-X6516-GBIC SAL0723EMDG

8 0 SLB Application Processor Complex WS-X6066-SLB-APC SAD075004W3

10 6 Firewall Module WS-SVC-FWM-1 SAD080801A7

11 48 SFM-capable 48 port 10/100/1000mb RJ45 WS-X6548-GE-TX SAD0750060X

12 16 SFM-capable 16 port 10/100/1000mb RJ45 WS-X6516-GE-TX SAL0717CD2U

13 16 SFM-capable 16 port 10/100/1000mb RJ45 WS-X6516-GE-TX SAL0716C3LN

Mod MAC addresses Hw Fw Sw Status

--- ---------------------------------- ------ ------------ ------------ -------

1 0009.1245.3010 to 0009.1245.3011 3.11 7.1(1) 12.2(17d)SXB Ok

3 0009.11f1.c200 to 0009.11f1.c20f 5.3 6.3(1) 8.3(0.110)BO Ok

4 0005.7487.6458 to 0005.7487.6467 5.3 6.3(1) 8.3(0.110)BO Ok

6 000d.2907.9a20 to 000d.2907.9a2f 5.5 6.3(1) 8.3(0.110)BO Ok

8 0002.fcc1.813c to 0002.fcc1.8143 1.7 4.1(2) Ok

10 000e.847f.a1a0 to 000e.847f.a1a7 3.0 7.2(1) 2.2(1) Ok

11 000e.83cf.70c0 to 000e.83cf.70ef 7.0 7.2(1) 8.3(0.110)BO Ok

12 000c.ce3e.81e8 to 000c.ce3e.81f7 2.5 6.3(1) 8.3(0.110)BO Ok

13 000b.5ff9.afd8 to 000b.5ff9.afe7 2.5 6.3(1) 8.3(0.110)BO Ok

Mod Sub-Module Model Serial Hw Status

--- --------------------------- ------------------ ------------ ------- -------

1 Policy Feature Card 2 WS-F6K-PFC2 SAL0652ASZD 3.3 Ok

1 Cat6k MSFC 2 daughterboard WS-F6K-MSFC2 SAL06499JMP 2.5 Ok

11 Cisco Voice Daughter Card WS-F6K-VPWR-GE SAD074801PV 1.0 Ok

Cisco Employee

Re: Log Error Messages 6500

The errors are cosmetic but you can upgrade IOS to get past the following bug.

http://www.cisco.com/cgi-bin/bugtool/onebug.pl?bugid=CSCed79711

New Member

Re: Log Error Messages 6500

Thank you very much for your help and assistance.

118
Views
0
Helpful
6
Replies