Logging setting in AS5350 to see Busy / Faulty remote Modems.

[rhegde]

I am using AS5350 for dial out to the remote locations to acquire data from WinNT servers RAS.

How can I configure AS5350to see if the remote modem is BUSY,or Host not responding or Faulty PSTN line etc. I would like to know why I could not connect to the remote server. Any help to configure AS5350 to acheive is apreciated,

Thanks

Rav

[p.dimitrije]

If I understand you corectly you need something like this:

debug dialer

debug isdn q931

debug isdn q921

debug modem

This will give you more then you need, so use only few of these commands at a time.