Logging setting in AS5350 to see Busy / Faulty remote Modems.
I am using AS5350 for dial out to the remote locations to acquire data from WinNT servers RAS.
How can I configure AS5350to see if the remote modem is BUSY,or Host not responding or Faulty PSTN line etc. I would like to know why I could not connect to the remote server. Any help to configure AS5350 to acheive is apreciated,
The need was to reach an host inside a LAN through a VPN connection managed by the LAN gateway (Cisco 1921).
The LAN gateway performs NAT and there was a dedicate nat rule for the host i wanted to reach through VPN.
I couldn't connect to the hos...
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does