I see this report come up in Logical discrepancy and it say this non-trunk port 2/13 is in a mismatch Native VLAN. Looking at Port 2/13 on the switch shows that it belongs to a valid VLAN that also has so many other ports belonging to it. At the end of the report, it say No translational VLAN and state of 1.
So why is it reporting this error and what does it mean and the solution?.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...