This is my first steps to make connection between win98 station to win2k server via Cisco router.
Inside local subnets I can simply login to server from win9X station with DS client. Problem is on second side. Ping is working - it's mean I can ping through WAN to router in subnet with win2k server. Next I tried ping with succes to win2k server. Station has static address from local subnet 188.8.131.52 , server has address from second subnet - 192.168.0.1 I wrote this address into tcpip protocol.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...