We have an old copy of CW2000 Campus (RME+CSWI) for HP-UX 10.20.
We finally have a machine with enough disk and ram to actually run it to see if we want to keep it (it's been sitting on a shelf for a couple of years...)
The essentials OSG won't stay running. We found info in the release notes pointing us to a patch named dmgt-tune1.0-hpux-rme2.0.sh which is no longer on the CCO web site. Anyone out there have a copy they could email?
I tried to open a TAC case but was notified of an "entitlement" issue (Cisco's way of telling me I don't have support ) and they said someone would get back to me. I thought I'd post here in hopes of getting an answer sooner. I haven't been contacted by the TAC regarding who owns the case, so it's difficult to work with that unknown entity.
The patch Cisco provided didn't help. Anybody out there running CW2000 campus (rme 2.x/cswi 2.x) under hp-ux 10.20? We're budget constrained to not update either cw2000 or hp-ux at this time and need to get rme 2.x to work. The essentials OSG process won't stay running beyond 5-10 seconds at start-up. If someone is running this combination of cw2000/hp-ux and could give us some ideas, we'd appreciate it. Cisco told us to go to rme 3.x but that requires hp-ux 11.0.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...