I am looking to upgrade an 1812J router to 1921/K9 router with 8-port double wide switch port.
One of the main reasons for the upgrade is because during the when we have internet music streaming on some devices, it cuts out when the traffic gets too heavy. Thought a more powerful device should do the trick.
What's the best way to migrate the config? (We have access lists, vlans, etc. configured on the original device)
Also, any suggestions on how to adjust our config to prevent dropouts from happening?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...