3 Switches ( 1,2 and 3) with 2 gigabit cards each ( a and b). 2A connected to 1B, 2B connected to 3A. The world is happy, traffic is flowing. We installed another switch ( Gigabit 4A and 4B)and for redundancy connected 4A to 3B and 4B to 1A so if one of the cables failed there would still be a path. As I found out, this doesn't work. I am thinking spanningtree will rectify this but am not sure
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...