05-15-2006 11:34 PM - edited 03-03-2019 03:13 AM
Hi
I wanted to upgrade my Cisco 3620 (R4700) and 2611 (MPC 860) routers to the minimal supported IOS Release for installing SDM 2.3.1. I am stuck with quite a few queries in this regard:
1. Release Notes for SDM lists supported models as Cisco 2611XM and Cisco 3620.
Is 2611XM different from mine - 2611(MPC 860)?
------------------------------------
'Sh Ver' on 2611 enlists he following details:
IOS TM C2600 Software (C2600-IS-M) R 12.2(2)T1
ROM Bootstrap v 11.3(2)XA4 FC1
Cisco 2611 (MPC860) Processor, 61440/4096 bytes memory.
"Sh Flash" depicts the following:
C2600-is-mz.122-2.T1.bin
--------
Now, when I go to download IOS Release 12.4.4T listed for platform 2610XM-2611XM, it gives me varios options to choose software feature sets, for example:
ADVANCED ENTERPRISE SERVICES WITH SNA SWITCH
ADVANCED IP SERVICES
ADVANCED SECURITY
ENTERPRISE BASE
ENTERPRISE BASE W/O CRYPTO etc..etc..etc.
What should I choose and what all am I licenced for?
Same is the case with my 3620.
"Sh flash", tells me that my image file is: c3620-i-mz.122-5d.bin.
On this router series, the last supported IOS Release is : 12.3.19(GD)
Available for various options, Which one should I choose to download??
Options include:
ENTERPRISE BASIC
IP
IP PLUS
IP/FW/IDS
IP/FW/IDS PLUS IPSEC 3DES BASIC NO ATM
etc..etc..etc.
Which one should I choose?
Please Advise!!
Rgds
05-16-2006 01:47 AM
Hi Friend,
Dont get confuse:
Have this link and go through it... you will understanding the new IOS packing details:
http://www.cisco.com/en/US/products/sw/iosswrel/ps5460/prod_bulletin09186a00801af451.html
HTH, Please rate if it does.
-amit singh
05-17-2006 10:04 AM
Thanks for the reply Amit.
Section 4 (migration guide of the suggested link)does related the migration path for my current 2600 image "c2600-is-mz" to be replaced with "C2600-ipvoice-mz".
There is nothing listed whether IOS v 12.3 is supported on my 3620 whose current image is:c3620-i-mz.122-5d.bin.
Also: There one minor confusion which arose after glancing through the Table 1 of Section 3 which states that
---------------------------------------------
"The following platforms do not support Cisco IOS Packaging in Release 12.3: Cisco 1720, Cisco 2600 non-XM, and the Cisco 3600 Router Series"
---------------------------------------------
Two of the unsupported 12.3 platforms are excatly mine, Cisco 2600 non-XM and 3600.
Still slightly confused there.
Pls Advise!!
EDITED::
I just read the link here:http://tinyurl.com/hshtb
and it says the 12.3 supports both Cisco 2611 and 3620.
I got the migration path for 2611 from the earlier link you provided, please advise on the 3620 migration path from current "c3620-i-mz.122-5d.bin", or relate the document as despite considerable effort, I have failed to find it.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide