We plan to implement LRE solution connecting 24 offices using LRE 24 Port switch. We intend to implement 48 POTS SPlitter also. Can anybody suggest what cables do we need to connect 24 connections from PBX to SPlitter and 24 Connections from Splitter to Jackpanel to further the connection upto the 24 office. These offices will have CPE which will again split voice and data.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...