Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

LS1010 singlemode multimode interface.

We recently had a physical disaster in our computer room and had to physically move our LS1010 and Cat5500 switches to an adjacent room. We had singlemode fiber coming in and terminating into the LS1010 which then is converted to multimode and distributed to our cat5500 asp and Lane Emulation cards. Our adjacent room had multimode fiber runs to the original computer room. We patched the singlemode fiber to our fiber patch panel but this has multimode fiber. So now instead of the singlemode terminating into the LS1010 it is now singlemode -> multimode -> LS1010. The diameter for multimode is ~50m and singlemode is 8-9m. Is this okay or do we need to extend the singlemode to the new computer room? Any help would be appreciated.

1 REPLY
Bronze

Re: LS1010 singlemode multimode interface.

Extending the single mode fibre would be the best option. If that is difficult for some reason, I think you can use some converter to achieve this.

90
Views
0
Helpful
1
Replies
CreatePlease to create content