Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

LS1010

What is the command to assign on a link ATM the CBR to 128 KBps????

Thanx a lot

2 REPLIES
New Member

Re: LS1010

New Member

Re: LS1010

if I have a LS1010 where attached to interface ATM0/0/2 i Have An ALCATEL DSLAM configured with a pvc 0/32 and i have a router 3640 attached to interface ATM0/0/3 of the LS1010 (pvc 1/33) .. How can I configured a cross PVC beetween the 2 devices ??? (DSLAM and Router)

EXamble that I configured...(correct?)

!

interface ATM0/0/2

ip address 192.168.1.254

no ip directed-broadcast

no atm ilmi-keepalive

uni-version 4.0 side network type private

!

interface ATM0/0/3

ip address 1.1.1.254 255.255.255.0

no ip directed-broadcast

no atm auto-configuration

no atm ilmi-keepalive

uni-version 4.0 side network type private

atm pvc 1 32 interface ATM0/0/2 0 32

Router:

interface ATM2/0

no ip address

no ip directed-broadcast

atm uni-version 3.0

atm pvc 1 0 16 ilmi

no atm ilmi-keepalive

!

interface ATM2/0.1 point-to-point

ip address 1.1.1.1 255.255.255.0

no ip directed-broadcast

pvc 1/33

encapsulation aal5snap

cbr 128000

Ip address DSLAM 192.168.1.1

Ip address f0/0 router 192.168.0.253

102
Views
0
Helpful
2
Replies