Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

MAC Address Filtering is not working on C6500 with sup7203b

Hi All,

We are trying to configuring mac ACLs on our Cisco 6500 with Sup7203B and PFC3B with IOS version 12.2(18)SXD6. Below is the configuration that we used.

mac access-list extended test

deny any any

interface g8/2

mac access-group test in

172.16.0.15-----(g8/2)--->C6500<---(g8/1)-------172.16.0.10

Will this only work on non-ip traffic? We weren't able to get it working on the C6500 but its working using C3750 and C2950 switches.

Please advise, thank you.

Regards,

Ansley

1 REPLY

Re: MAC Address Filtering is not working on C6500 with sup7203b

Hi Ansley,

This works only for NON-IP traffic. Each type of ACL (IP, IPX, and MAC) filters only traffic of the corresponding type. A Cisco IOS MAC ACL never matches IP or IPX traffic.

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/122sx/swcg/acl.htm

regards,

-amit singh

124
Views
0
Helpful
1
Replies
CreatePlease login to create content