Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

maintenance

Dear all,

We are doing maintenance for our networks which contents the following

Cisco 3550 series switches

Cisco 2900 series switches

Cisco 2950 series switches

Cisco LRE switches 2950 series

Cisco router 1811

Cisco router 1750

Cisco router 2600

Now, I would like to know the commands which are use for the above cited devices.

Example: - show environment

show post

show region

Thanks in advance.

Regards,

Khan

2 REPLIES
Hall of Fame Super Bronze

Re: maintenance

The most comprehensive command is:

show tech-support

Make sure to enable capture on whatever terminal application you are using, the output is quite large.

Please rate helpful posts.

Thanks

New Member

Re: maintenance

hi,

As per your query here are some links that you can use for the following devices to check the show commands supportedand their use:

Cisco 3550 series switches: http://www.cisco.com/univercd/cc/td/doc/product/lan/c3550/12225see/cr/cli2.htm

Cisco 2900 series switches: http://www.cisco.com/univercd/cc/td/doc/product/lan/c2900xl/29_35wc6/cli/clicmds.htm

Cisco 2950 series switches: http://www.cisco.com/univercd/cc/td/doc/product/lan/cat2950/12122ea5/2950cr/cli2.htm

Cisco LRE switches 2950 series : http://www.cisco.com/univercd/cc/td/doc/product/lan/cat2950/12122ea5/2950cr/cli2.htm

Hope this helps !!

Regards,

Param

300
Views
0
Helpful
2
Replies
CreatePlease to create content