08-25-2006 10:54 AM - edited 03-03-2019 04:42 AM
Dear all,
We are doing maintenance for our networks which contents the following
Cisco 3550 series switches
Cisco 2900 series switches
Cisco 2950 series switches
Cisco LRE switches 2950 series
Cisco router 1811
Cisco router 1750
Cisco router 2600
Now, I would like to know the commands which are use for the above cited devices.
Example: - show environment
show post
show region
Thanks in advance.
Regards,
Khan
08-25-2006 11:24 AM
The most comprehensive command is:
show tech-support
Make sure to enable capture on whatever terminal application you are using, the output is quite large.
Please rate helpful posts.
Thanks
08-28-2006 12:29 PM
hi,
As per your query here are some links that you can use for the following devices to check the show commands supportedand their use:
Cisco 3550 series switches: http://www.cisco.com/univercd/cc/td/doc/product/lan/c3550/12225see/cr/cli2.htm
Cisco 2900 series switches: http://www.cisco.com/univercd/cc/td/doc/product/lan/c2900xl/29_35wc6/cli/clicmds.htm
Cisco 2950 series switches: http://www.cisco.com/univercd/cc/td/doc/product/lan/cat2950/12122ea5/2950cr/cli2.htm
Cisco LRE switches 2950 series : http://www.cisco.com/univercd/cc/td/doc/product/lan/cat2950/12122ea5/2950cr/cli2.htm
Hope this helps !!
Regards,
Param
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide