I am in the process of changing my managment VLAN from VLAN 1 to VLAN 2. I made the change on a 5500 switch with a RSM module and it is connected to our backbone switch which is also a 5500 and it works fine. The problem I am having is how do you change the management VLAN on a 2900/3500 XL? I created the new VLAN but it will not become active until I remove the IP address off the VLAN 1 interface. It then displays a status of UP Down for VLAN 1. The new VLAN 2 shows UP UP but I am not able to ping the backbone switch. The connection between the 2900 and my backbone is a ISL trunk link. The management VLAN has not been changed on the backbone switch yet, does this have to be changed first before I can change the other switches?
The documentation keeps refering to configuring cluster to make the VLAN management change but I am not using cluster.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.