I am running LMS 2.2, RME 3.5 on a 2000 server and I can not see my PIX 520 ver(6.3.1) on either Inventory or Campus Manager. I have snmp configured and I have also set it up as a seed device and it will not discover. I also tried to manually add it to the inventory in RME and was unable to do so. Is there any insturctions on adding a PIX to CiscoWorks?
This document gives several answers on frequently asked questions for PFRv3 channel state behavior.
Q1: What are all the channel operational states from a BR (border role) perspective and what are the rules/conditions to be in each st...
The need was to reach an host inside a LAN through a VPN connection managed by the LAN gateway (Cisco 1921).
The LAN gateway performs NAT and there was a dedicate nat rule for the host i wanted to reach through VPN.
I couldn't connect to the hos...
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...