Inside CWW6.1, Ciscoview application works fine with a catalyst 4506, but the "Show command" and "Threshold Manager" doesn't works with this device, a message "unsupported device" is displayed. However, in the release note the catalyst 4506 (OID 18.104.22.168.22.214.171.1242) is supported with all the applications. Where is the error ??
The latest package (v 7.0) is used and the device expanded view is correctly diplayed. I've plugged in a protocol analyzer and the exchange between the Ciscoworks station and the Catalyst 4506 (with show command or threshold manager) stop immediatly after the answer to the first snmp get request. The smp answer sent by the Catalyst is the OID (126.96.36.199.188.8.131.52.502)
The problem is solved. I've loaded the "nmidb.1.0.082" package and with this package the "Threshold Manager" and "Show Command" works correctly. This package add the new devices to the Ciscoworks Windows application.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.