managing switch

[The_guroo_2]

Hi! i am new to cisco and wnat to know one thing.....how can we manage switch from web interface....and which switches can be managed from web....i have 1924 and 2950 switch i have the console cable but dont know how to do it through web.....do i have to install something....plz help me out ....thanks in advance

[Prashanth Krishnappa]

For 2950's use CNA

http://www.cisco.com/en/US/products/ps5931/index.html

You might have to upgrade IOS on your 2950 to support it.

PS:rate useful posts

[The_guroo_2]

mate what abt 1900 switch......??

[aazim]

In addition to Cisco Network Assistant which is a Windows based application, the 2950 switch also comes with an embedded device manager. All you need is to type the IP address of the 2950 switch in the browser to access it. Please note that the embedded device manager comes with the .tar images so if you have only been using .bin images to upgrade the switch then you will not get the device manager. If this is a brand new switch then by default it does come with the web device manager.

[vladrac-ccna]

Hello guroo,

check the default command

ip http server

Good place to start:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cg/hnm_c/ch25/hhttp1s.htm

HTH,

if it does, please rate this post.

Vlad

[wang19841229]

switch's config have ip http server is OK

2950 switch have a manage IP .IN IE import switch's manage IP

I am chinese so my English is not good.

[David Stanford]

You can also use Cisco Works LMS or SNMS which are web based and have several components to manage Cisco devices.

http://www.cisco.com/en/US/products/sw/cscowork/ps2425/index.html

http://www.cisco.com/en/US/products/sw/cscowork/ps2408/index.html