Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

Manejo de Apilibilidad del Catalyst 2948G-l3

Necesito saber cuando va a manejar la stacabilidad el Switch de Layer 3 Catalyst 2948G-L3, ya que actualmente sólo lo hace con GBIC para Fibra .

4 REPLIES
Community Member

Re: Manejo de Apilibilidad del Catalyst 2948G-l3

traduzca por favor el stacabilidad a los ingleses

Orignial question

I need to know when it is going to handle to the stacabilidad the Switch de Layer 3 Catalyst 2948G-L3, since at the moment only it does with GBIC for Fiber.

Community Member

Re: Manejo de Apilibilidad del Catalyst 2948G-l3

I need to conection the Catalyst 2948G-L3 in the Backbone with two GBIC WS-3500-XL with two Catalyst 3548 .

Is the possible this? .

Thanks,

FRANKLIN BRIONES

Community Member

Re: Manejo de Apilibilidad del Catalyst 2948G-l3

The 2948G-L3 has two GBIC ports. You can connect each gig port on the 2948 to each 3500. Don't forget to order GBICs.

http://www.cisco.com/univercd/cc/td/doc/product/l3sw/4908g_l3/ios_12/rel_nts/78_13139.htm#xtocid113955

1000BASE-SX WS-G5484=

1000BASE-LX/LH WS-G5486=

1000Base-ZX extended reach GBIC(singlemode) WS-G5487=

1000BASE-T GBIC WS-G5482

Community Member

Re: Manejo de Apilibilidad del Catalyst 2948G-l3

I can to connect the Catalyst 2948G-L3 using WS-C5482 with Catalyst 3548 y 2924M-XL, if this use the Module WS-3500-XL for stack .

I wait for response .

Thanks,

Franklin

186
Views
0
Helpful
4
Replies
CreatePlease to create content