cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
208
Views
0
Helpful
1
Replies

mcast question

r.crist
Level 1
Level 1

I have a cat5500 with an RSM and several vlans that I'm trying to use to multicast video from an IP/TV server cluster. I think I have the switch and RSM configured properly, but the RSM won't forward the IGMP membership report packets from the client vlan to the server vlan. I have igmp enabled on the cat:

#igmp

set igmp fastleave enable

!

and here's relevant config from the RSM:

ip multicast-routing

!

interface Vlan60

description SON vlan60: User60

ip address 10.2.60.8 255.255.255.0

no ip redirects

no ip directed-broadcast

ip pim sparse-mode

no ip route-cache cef

no ip mroute-cache

mls rp vtp-domain SON

mls rp ip

standby 1 priority 100 preempt

standby 1 ip 10.2.60.10

!

interface Vlan120

description SON vlan120: 4th-labs

ip address 10.1.120.8 255.255.255.0

no ip redirects

no ip directed-broadcast

ip pim sparse-mode

no ip route-cache cef

ip cgmp

no ip mroute-cache

mls rp vtp-domain SON

mls rp ip

standby 1 priority 100 preempt

standby 1 ip 10.1.120.10

!

Any help would be appreciated.

Rich

1 Reply 1

Harold Ritter
Cisco Employee
Cisco Employee

IGMP messages are not forwarded from one VLAN to another. You see you have configured PIM sparse-mode. I assume you have a Rendez-vous point then. Right? If this is just for a test then you could use dense mode to propagate multicast between the two VLANs.

Hope this helps.

Harold Ritter
Sr Technical Leader
CCIE 4168 (R&S, SP)
harold@cisco.com
México móvil: +52 1 55 8312 4915
Cisco México
Paseo de la Reforma 222
Piso 19
Cuauhtémoc, Juárez
Ciudad de México, 06600
México
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: