Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

MCB callback over isdn

how can i conf callback for microsoft 2000 over isdn using 36er Router

can you please give an example.

This is my config but it does not work.

version 12.2

service exec-callback

!

username student callback-dialstring ""

password 0 cisco

!

Interface Dialer2

ip address 10.115.3.2 255.255.255.0

encapsulation ppp

dialer pool 1

dialer remote-name student

peer default ip address pool RASIN

no fair-queue

pulse-time 0

no cdp enable

ppp callback accept

ppp authentication chap

ppp multilink

1 REPLY
Anonymous
N/A

Re: MCB callback over isdn

Make sure that you have "aaa authorization

network ppp default local" configured. Enable

the following debug commands to see what

is going on:

debug ppp neg

debug callback

debug ppp cbcp

debug aaa authen

debug aaa author

Otherwise, the config looks fine. Make

sure that you have recent code, as there

were bugs with MS callback in the past.

118
Views
0
Helpful
1
Replies
CreatePlease to create content