Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Meaning of '*' for "modem hardware state" in "show line"

I have been trying to find for sometime the meaning of the '*' character that is sometimes next to the signaling acronyms when one does a "show line xx" command.

Modem hardware state: CTS* DSR* DTR RTS

I used to think they represented a recent change in the status, but I don't think so anymore.

Thanks for your help.

SK

1 ACCEPTED SOLUTION

Accepted Solutions
Silver

Re: Meaning of '*' for "modem hardware state" in "show line"

* next to a signal indicates one of two things: The signal has changed within the past few seconds or the signal is not being used by the modem control method selected.

Please refer to:

http://www.cisco.com/warp/public/112/chapter16.htm

Thanks, Mak.

2 REPLIES
Silver

Re: Meaning of '*' for "modem hardware state" in "show line"

* next to a signal indicates one of two things: The signal has changed within the past few seconds or the signal is not being used by the modem control method selected.

Please refer to:

http://www.cisco.com/warp/public/112/chapter16.htm

Thanks, Mak.

New Member

Re: Meaning of '*' for "modem hardware state" in "show line"

I missed that the first time I skimmed through the document. Thank you very much!! =)

998
Views
0
Helpful
2
Replies
CreatePlease login to create content