I have 4 interfaces with two enabled. When I have the 2nd interface enabled and running, the 3550 becomes unstable and i drop packets. IOS is 12.1 and memory is 64 mb. Has anyone else run into this problem? I am going to update the IOS during off hours. But I am wondering if I need to add more memory?
Re: memory issue with a 3550 switch acting as router?
spanning tree is enabled:
spanning-tree extend system-id
I can't plug the second interface in yet due to the flakiness bringing down the entire lan but i can give you snapshots and see if you can determine if anything is wrong. (I believe it has been cleared since the last time)
Here is the first one:
Vlan1 is up, line protocol is up
Hardware is EtherSVI, address is 000c.316d.2d00 (bia 000c.316d.2d00)
Internet address is x.x.x.x/24
MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:00, output 00:00:00, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/7471/0 (size/max/drops/flushes); Total output drops: 2
Queueing strategy: fifo
Output queue :0/40 (size/max)
5 minute input rate 5000 bits/sec, 7 packets/sec
5 minute output rate 1000 bits/sec, 2 packets/sec
1497214 packets input, 142708849 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.