Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Memory on Supervisor2 and MSFC2

Hi

I have a Supervisor2 with 128MB/32MB DRAM/Flash and a MSFC2 with 128MB/32MB DRAM/Flash.

I like to convert the module to native IOS. Please tell me where I have to upgrade the DRAM to 256MB, only on the Supervisor or only on the MSFC or on both?

Regards

Peter

2 REPLIES

Re: Memory on Supervisor2 and MSFC2

Hi Peter,

AFAIK you need to upgrade it on MSFC

Have a look at this link

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/12_1e/ol_2310.htm#wp253613

Also look at this link as how to upgrade DRAM on MSFC

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/cfgnotes/78_6953.htm

HTH, if yes please rate the post.

Ankur

Re: Memory on Supervisor2 and MSFC2

Please upgrade both the Sup and MSFC. It is recommended to upgrade the both as generally the IOS images are very big size.

Please see the link below.

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/12_1e/ol_2310.htm#wp253613

HTH, Please rate if it does.

-amit singh

103
Views
0
Helpful
2
Replies
CreatePlease to create content