Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Memory Requirement

Hi,

currently my router is using 30% of memory, currently its running one 2Mb internet link. i am going to configure two more 2Mb link with one VPN on each link.So shall i increase the memory on my router ?

regards

Neo

4 REPLIES

Re: Memory Requirement

Hi

It depends which router it is ....Can you give the model no and the current show version output?

Regards

JD

New Member

Re: Memory Requirement

this is a 3640 Router.

Cisco Internetwork Operating System Software

IOS (tm) 3600 Software (C3640-IK9S-M), Version 12.2(17a), RELEASE SOFTWARE (fc1)

Copyright (c) 1986-2003 by cisco Systems, Inc.

Compiled Thu 19-Jun-03 11:24 by pwade

Image text-base: 0x60008930, data-base: 0x61296000

ROM: System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

SM-MB-WGW1 uptime is 10 weeks, 2 days, 1 minute

System returned to ROM by power-on

System restarted at 19:06:13 IST Sun May 7 2006

System image file is "flash:c3640-ik9s-mz.122-17a.bin"

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

cisco 3640 (R4700) processor (revision 0x00) with 49152K/16384K bytes of memory.

Processor board ID 26394328

R4700 CPU at 100Mhz, Implementation 33, Rev 1.0

Bridging software.

X.25 software, Version 3.0.0.

SuperLAT software (copyright 1990 by Meridian Technology Corp).

1 FastEthernet/IEEE 802.3 interface(s)

2 Serial(sync/async) network interface(s)

DRAM configuration is 64 bits wide with parity disabled.

125K bytes of non-volatile configuration memory.

16384K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

regards

Neo

Re: Memory Requirement

Hi

It will run like anything. I have a 3640 running 6 2mb links...

VPN will be of no issue.

Regards

JD

New Member

Re: Memory Requirement

Make sure your paired kits are the same IC DRAM & the same SPD serial code:

MAIN CISCO DRAM MEMORY
Maximum Memory: 128mb
Base Memory: 8mb (Removable)
Upgrade Sockets: 4 (2 banks of 2)

CISCO FLASH MEMORY
Maximum Memory: 32mb
Base Memory: 8mb (Removable)
Upgrade Sockets: 2 (2 banks of 1)

http://simondirect.com/store/index.php?main_page=index&cPath=7_32

170
Views
0
Helpful
4
Replies
CreatePlease to create content