Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

MFR

I have a 3725 with 2 T1csu/dsu, I would like tto bundle rhe 2 ti's tto make

it look like a 3mb pipe, I used the example cisco had and as soon as i put

the encap frame=relay on the 2nd ti the first ti went down, Any help would

be appreciated.

Thanks

Dennis

2 REPLIES
Silver

Re: MFR

The following configuration will solve your bundling T1 in frame-relay

interface serial 2

no ip address

encapsulation frame-relay

frame-relay lmi-type ansi

!

interface serial 2.1 point-to-point

frame-relay interface-dlci 32 ppp virtual-template1

!

interface Virtual-Template1

ip unnumbered ethernet 0

ppp authentication chap pap

And also check the link

http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120t/120t1/pppframe.htm

Cisco Employee

Re: MFR

Make sure your provider supports MFR on his frame swich.

check this URL for sample configuration.

http://www.cisco.com/en/US/partner/products/sw/iosswrel/ps1839/products_feature_guide09186a0080087cbf.html#1015440

thanks

Suresh

227
Views
0
Helpful
2
Replies