mgnt vlan 1 ??

[alonzo-garza]

If I've set up the mgnt vlan on my cisco switches to be other than vlan 1 do I need to .....

a.) Shut down vlan 1 ???

b.) use the key work "management" when declaring the mgnt. IP address on 4006's or 3550's

thanks,

~zo

[psijnja]

a) If your using IOS, on non layer 3 switches,

there can be only one active VLAN interface. The other will shutdown automaticly.

b) if the 4006 or 3550 are running CatOS the use command:

set interface sc0 /

to configure the management interface.

If the 4006 or 3550 are running IOS, see a.

Hope this helps

[jhalldn]

In the newer boxes and IOS, the "management" command has been erased.

Then you have to do a "shutdown" on the VLAN 1 interface and configure the the new VLAN interface you want with a address.