Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

MGX specs under load conditions

I'd appreciate if someone could answer or point me to the right source to find the following info:

1. Fabric switching performance------- 14 Gbps full-duplex ?

2. How many Calls/sec?---- 200 ? ( this also gives latency of call = fixed_call_latency + peak#calls-in-progress /* calls/sec

3. What is the Fixed call latency, msec?----40 ? (ie. under no load what is time for call setup)

4. #Multicast groups---- 128 ? (ie. how many sources can be m/c ?)

5. #Multicast leafs------ 1,000 ? (ie. how many end users)

Thanks very much

1 REPLY

Re: MGX specs under load conditions

Since there has been no response to your post, it appears to be either too complex or there is no public information available at this time. If you don't get a suitable response to your post, you may wish to review our resources online at http://www.cisco.com/go/solutions. You may also contact our product information line at 1-800-553-NETS or a Cisco Systems Engineer at your local Cisco office or reseller. To locate your local Cisco representative, visit http://www.cisco.com/warp/public/687/Directory.shtml

If anyone else in the forum has some advice, please reply to this thread.

Thank you for posting.

93
Views
0
Helpful
1
Replies
CreatePlease login to create content