cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
194
Views
0
Helpful
1
Replies

MIBs for 5min output

mlew
Level 1
Level 1

Are there MIBs to collect the following output:?

5 minute output rate 2000 bits/sec, 3 packets/sec

This came from a 2900XL. I know I can collect octet outputs, errors, etc, etc.

I would like to have an SNMP trap when packets/sec exceed x amount, within that 5 minute period.

Any ideas? Thank you!

1 Reply 1

owillins
Level 6
Level 6

Here is the information on how to obtain a MIB. The document deals with 2950 LRE but the process is the same for 2900XL. Also link to a document on how to configure traps on switches is provided.

http://www.cisco.com/en/US/products/hw/switches/ps4916/products_configuration_guide_chapter09186a008011c575.html#25403

http://www.cisco.com/en/US/tech/tk648/tk362/technologies_configuration_example09186a0080094aa1.shtml

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco