Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Mica modem binding to interface(s)

Hello,

our customer uses C3745 and C3825  machines with 2 E1s and 2 boards with 30 Mica-Modems per board.

We use these routers for dialing out and connect with remote modems.

We want to define a binding between up modems of each board with E1 controller.

i.e For router C3745 the bind would be

Board 1 -> e1 3/0 --> Interface Serial 3/0:15

Board 2 -> e1 3/1 -> Interface Serial 3/1:15

We tested  dialer profiles and rotarys, also the rotary cmd on the line,

but  for dialout the router just takes the next available interface it  wants.

Is there a possibility to get  this job fixed ?

Thanks for help in advance.

Regards,

Alfredo

179
Views
0
Helpful
0
Replies