Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Microsoft VPN through Cisco 802 DSL Router to Microsoft VPN Server

I am trying to connect with Microsoft VPN client to a Microsoft VPN Server behind a Cisco 802 DSL Router. I cannot get it to let me through. I can connect and receive a DHCP address from the VPN server, if I'm on the local network, so the VPN server appears to be working. When I try to connect through the Internet, I get the following:

Error 629: You have been disconnected from the computer you dialed.

Any ideas how to set this up? You help is greatly appreciated.

3 REPLIES
Cisco Employee

Re: Microsoft VPN through Cisco 802 DSL Router to Microsoft VPN

Need to see the config of 802 router..IP address of the VPN server is a public or privet?..Tejal

New Member

Re: Microsoft VPN through Cisco 802 DSL Router to Microsoft VPN

The IP address of the VPN server is private. 192.168.0.200.

I have this in the router

ip nat inside source tcp 192.168.0.200 1723 xx.xxx.xxx.xxx 1723 extendable

replacing the xx with the external ip address of the router.

New Member

Re: Microsoft VPN through Cisco 802 DSL Router to Microsoft VPN

when the vpn client gets disconnected, is the machine situated on another network behind a firewall, or directly connected to an ISP?

When you say you get a dhcp address while on the inside, are you saying you can successfully connect using the VPN client to the VPN server while on the LAN? This would control for authentication & pptp profile configuration errors

192
Views
0
Helpful
3
Replies
CreatePlease to create content