03-01-2004 05:00 AM - edited 03-02-2019 01:56 PM
I'd like to find out what is the minimum speed of the VIP4-50 in serial interface(PA-4T) on a Cisco 7500
=====================================================
Router#sh ver
Cisco Internetwork Operating System Software
IOS (tm) RSP Software (RSP-JSV-M), Version 12.2(13)T1, RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Fri 03-Jan-03 17:56 by ccai
Image text-base: 0x60010948, data-base: 0x61F04000
ROM: System Bootstrap, Version 12.0(10r)S1, RELEASE SOFTWARE (fc1)
Router uptime is 46 weeks, 2 days, 20 hours, 59 minutes
System returned to ROM by reload at 15:24:14 UTC Fri Apr 11 2003
System restarted at 00:36:05 KOREA Sat Apr 12 2003
System image file is "slot0:rsp-jsv-mz.122-13.T1.bin"
cisco RSP8 (R7000) processor with 262144K/8216K bytes of memory.
R7000 CPU at 250Mhz, Implementation 39, Rev 1.0, 256KB L2, 2048KB L3 Cache
Last reset from power-on
G.703/E1 software, Version 1.0.
G.703/JT2 software, Version 1.0.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
Bridging software.
TN3270 Emulation software.
Chassis Interface.
3 FEIP2 controllers (6 FastEthernet).
1 VIP4-50 RM5271 controller (4 Serial).
4 VIP4-80 RM7000 controllers (2 GigabitEthernet)(2 HSSI)(1 POS).
6 FastEthernet/IEEE 802.3 interface(s)
2 Gigabit Ethernet/IEEE 802.3 interface(s)
4 Serial network interface(s)
2 HSSI network interface(s)
1 Packet over SONET network interface(s)
2043K bytes of non-volatile configuration memory.
32768K bytes of Flash PCMCIA card at slot 0 (Sector size 128K).
20480K bytes of Flash PCMCIA card at slot 1 (Sector size 128K).
16384K bytes of Flash internal SIMM (Sector size 256K).
Slave in slot 7 is running Cisco Internetwork Operating System Software
IOS (tm) RSP Software (RSP-DW-M), Version 12.2(13)T1, RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Fri 03-Jan-03 13:40 by ccai
Slave: Loaded from system
Slave: cisco RSP8 (R7000) processor with 262144K bytes of memory.
Configuration register is 0x102
----------------------------------------------------Router#sh diag
~~~
Slot 10:
Physical slot 10, ~physical slot 0x5, logical slot 10, CBus 0
Microcode Status 0x4
Master Enable, LED, WCS Loaded
Board is analyzed
Pending I/O Status: None
EEPROM format version 1
VIP4-50 RM5271 controller, HW rev 2.01, board revision A0
Serial number: 22619471 Part number: 73-4708-02
Test history: 0x00 RMA number: 00-00-00
Flags: cisco 7000 board; 7500 compatible
EEPROM contents (hex):
0x20: 01 31 02 01 01 59 25 4F 49 12 64 02 00 00 00 00
0x30: 50 05 35 00 00 00 00 00 00 00 00 00 00 00 00 00
Slot database information:
Flags: 0x4 Insertion time: 0x1CFBF8C54 (33w3d ago)
Controller Memory Size: 256 MBytes CPU SDRAM, 64 MBytes Packet SDRAM
PA Bay 0 Information:
Mx Serial PA, 4 ports
EEPROM format version 1
HW rev 1.14, Board revision B0
Serial number: 25252478 Part number: 73-1577-07
--Boot log begin--
Cisco Internetwork Operating System Software
IOS (tm) VIP Software (SVIP-DW-M), Version 12.2(13)T1, RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Fri 03-Jan-03 13:45 by ccai
Image text-base: 0x60010930, data-base: 0x604C0000
--Boot log end--
What command can I use to find this out?
03-02-2004 04:49 PM
use the
show controller command for information about the card connections.
show interface for interface in question
more information on the PA-4t can be found that this url:
03-03-2004 09:11 PM
Thank you for your reply.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: