Missing devices in VTP views under campus manager topology services
When we do a topology discovery using Campus Manager version 3.1, the layer-2 view shows 15 devices are discovered. However, the VTP domain view shows only 5 devices discovered. We have check the configuration for the 10 undiscovered devices and confirmed that they belong the same VTP domain as the 5 discovered devices.
1) All the devices are Cat4006 running the same CatOS 6.3.3
[toc:faq]The ProblemOn traditional switches whenever we have a trunk
interface we use the VLAN tag to demultiplex the VLANs. The switch needs
to determine which MAC Address table to look in for a forwarding
decision. To do this we require the switch to do...
[toc:faq]Introduction:Netdr is a tool available on a RSP720, Sup720 or
Sup32 that allows one to capture packets on the RP or SP inband. The
netdr command can be used to capture both Tx and Rx packets in the
software switching path. This is not a substitut...
IntroductionOSPF, being a link-state protocol, allows for every router
in the network to know of every link and OSPF speaker in the entire
network. From this picture each router independently runs the Shortest
Path First (SPF) algorithm to determine the b...