Has anyone experience with multilink PPP, tunneled over l2tp and forwarded by a l2tp tunnel switcher (LNS1) to a second LNS?
One virtual-access interface and the bundle interface are beeing set up correctly on LNS2 (mlppp negotiation was ok) but when the second channel should be bundeled in, the process stops at the tunnel switcher (LNS1). In other words the tunnel switcher does not feed the second channel into the l2tp tunnel terminating on the LNS2.
I'm having te same problem. I've 5 LAC's who can set up a tunnel to two LNS routers. After troubleshooting for a few days I seem to have a working Lab setup but I fail to get it working in our production network.
I can send you the configs from the Lab devices if you like.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...