Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Mode button

Hi guys,

I need to disable the MODE button from the switch catalyst 3560 and 3550.

Do you know how to do it?

I'm affraid is not possible! :(

Best regards

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Mode button

Hi Nuno,

You can disable the mode button express setup by configuring:

Switch(config)# no setup express

http://www.cisco.com/univercd/cc/td/doc/product/lan/c3550/12225seb/cr/cli2.htm#wp3418315

HTH

Ankur

4 REPLIES

Re: Mode button

Besides using glue (permanent solution, so to say ;-)) I would not know of any configurable options ...

Regards, Martin

Re: Mode button

Hi,

why do you need the MODE button to be disabled? What is your underlying problem?

Martin

Cisco Employee

Re: Mode button

Hi Nuno,

You can disable the mode button express setup by configuring:

Switch(config)# no setup express

http://www.cisco.com/univercd/cc/td/doc/product/lan/c3550/12225seb/cr/cli2.htm#wp3418315

HTH

Ankur

New Member

Re: Mode button

That's right ankbhasi you are the MAN!!!

I need to disable that button because i will put the switch on the production area where someone can delete the configurations! I can't lock the switch...

Thanks guys :)

301
Views
0
Helpful
4
Replies
CreatePlease to create content