Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Modem debug

Hi,

I have a problem with one 5300. I use an application that opens a reverse telnet with the mica modems and then connect with a remote modem (with AT commands).

The problem is that the mica modems don´t seems to work in a transparent way and sometimes do not send some characters. How could I debug the characters that the modem are sending or receiving?

3 REPLIES
Silver

Re: Modem debug

Try "debug modem mica tx slot/port" and

"deb modem mica rx slot/port"

Thanks,

Mak.

New Member

Re: Modem debug

Thank, and do I need the "Modem Management Technology License" to use this command (I don´t have the 5300 here)?.

What is exactly this License?

Silver

Re: Modem debug

Hi,

This is a hidden command, can execute on CLI...MMTL is basically a licence to use these modem ports...morally speaking one should have it.

Thanks,

Mak.

231
Views
0
Helpful
3
Replies
CreatePlease to create content