I am using cisco 2511 access server. I have connected 5 multech modems (33.6kbps) to server. With these modem my server works fine. Now, i have 3 US robotics 56k modem and I have connected them in place of multitech modems. When i dial from remote location modem doesn't respond.
Also I don't have the secret and enable passwords. I am not able to login to the server.
what speed are the ports set to ? I seem to remember that 56K connections require a DIGITAL modem connection on the answering end (PRI/CT1/BRI); you will never exceed 33.6 dialing into any analog connected modem.
if you happen to have the running configuration of your AS2511, and if your enable password is a level 7 password, you could try and decrypt it using one of the password decryption applets like this one:
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.