Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

module compatabilaty

An existing customer with a Cat 5509 wishes to setup some Vlans & ISL Tagging Accross his network

Can I install a WS-X5302 RSM module & WS-X5410 Gig x 9 Module in the chassis if it contains a Supervisor Engine II. See Module & Version info

""

""Hardware Version: 1.3 Model: WS-C5500 Serial #: XXXXXXXXX

Mod Port Model Serial # Versions

--- ---- ---------- --------- ----------------------------------------

1 2 WS-X5509 007404473 Hw : 2.1

Fw : 5.1(2)

Fw1: 4.3(1)

Sw : 5.5(4a)

WS-F5511 007411257 Hw : 1.0 """"

or will i neet to upgrade to a WS-X5530-E3A or WS-X5550.

Many Thanks

Larry_s

1 REPLY
Cisco Employee

Re: module compatabilaty

You can install WS-X5302 and WS-X5410 in a CAT5500 with Sup2 Engine. However, for the 5410 to utilize all three 1.2-Gb backplane buses, you must have a Supervisor Engine III, III FSX, III FLX, or III G module

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat5000/hardware/modules/04ether.htm#xtocid996122

96
Views
0
Helpful
1
Replies